Views: 0 Author: Sally Publish Time: 2024-04-13 Origin: Site
In the current environment, children's expansion equipment is becoming more and more popular in the market. Whether it is a park, children's playground, or shopping mall, there are children's expansion equipment. Below, we will provide you with the inspection, repair and maintenance methods of expansion equipment:
Once a week, check whether the structure of each component of the equipment still meets the training requirements. If any screws are loose or damaged, they should be eliminated and improved immediately before training.
Before each use, check all parts of the fasteners that are prone to wear and loosening, the wire ropes on the corresponding rods, wire rope clamps, pulley components, wire rope turnbuckles, and bow shackles. When the wear of the safety equipment exceeds 1/10 of the original value, it should be updated: If the wire rope has broken strands, the loose parts should be updated, tightened and locked when the number of broken strands exceeds 1/10 of the total number of strands of the wire rope. Inspectors should wear safety belts and helmets while working.
Columns and beams should undergo anti-corrosion treatment every six months; the welded parts of the wire rope lugs should be inspected once a month; when the corrosion depth exceeds l/10 of the steel pipe wall thickness, they should be replaced. The bar hoops should be checked before each workout to see if they are moving freely on the crossbar. If it is found difficult to move, it should be lubricated in time.
Climb and secure all holds and climbing boards at least every six months. Someone must check the holds and climbing boards before each session. If anything is loose, it must be tightened before training. The connecting bolts behind the slate must be tightened at least every six months. Before each training session, check whether the worm and worm gear used to adjust the width of the broken bridge rotate freely within the specified stroke. If it is difficult to rotate, apply grease in time.
Wire rope should be greased at least every six months. Expansion equipment manufacturers believe that the corners and welds of all equipment should be anti-corrosion treated in spring and autumn every year, and in humid and rainy places before the rainy season. All instruments undergo anti-corrosion treatment every two years. During anti-corrosion treatment, the instrument must first be polished with 300-mesh gauze, and then painted twice with primer and topcoat.
