Views: 50 Author: Sally Publish Time: 2024-07-27 Origin: www.bettaplay.com
Interactive projection equipment has the characteristics of high heat generation, high maintenance cost, dust fear and complex operation. After long-term daily use, if the interactive projection equipment lacks certain maintenance, the interactive projector may occasionally experience high temperature protection, lumen attenuation, abnormal cooling system function, picture deformation, color deviation, plaques, inaccurate focus, etc.
Among the parts of the interactive projection equipment used in children's parks, the projector bulb and LCD panel are the most expensive parts of the interactive projection equipment (the bulb is generally thousands of yuan). Both have a certain use time. If the interactive projection equipment is in a high temperature environment and poorly ventilated working environment for a long time, it will accelerate the aging of its equipment components, and the brightness of the projector and other tickets will decay. Over time, the use effect of the equipment will not meet the game effect required by the children's park. Pocket House Amusement lists the following maintenance content of the interactive projection in the children's park, so that your children's park interactive projection game can better bring the best experience to customers.
1. It is forbidden to strongly impact, drop, squeeze and vibrate the interactive projection.
2. Pay attention to dust prevention and ventilation and heat dissipation in the use environment.
3. Reduce the switching frequency of the interactive projection to delay the service life of the bulb.
4. The interactive projection should be grounded as much as possible to prevent current interference from affecting the picture and sound.
1. Heat dissipation and ventilation inspection of interactive projection equipment
When using the interactive projection in the children's playground, you must pay attention to whether the indoor temperature and ventilation and heat dissipation around the interactive projection are normal. High temperature is the main factor affecting the life of the interactive projection. If the temperature is too high, please adjust the indoor temperature in time and maintain ventilation and heat dissipation of the equipment. performance.
2. Be careful to avoid dust on interactive projection equipment.
Indoor children's playgrounds need to be cleaned every day by cleaning staff, especially in places where interactive projections are installed. The floors should be mopped as much as possible to avoid generating a lot of dust. Dust in the air mixed with humid air adheres to the electronic components and optical components of interactive projection, affecting the imaging effect and increasing the hardware failure rate.
3. Pay attention to air humidity in interactive projection equipment
Through point 2 above, overly humid air will accelerate the electrical performance and failure rate of hardware.
4. Lens cleaning of interactive projection equipment
Do not use dry or rough materials to clean any optical components. If there is dust on the interactive projection lens, when the power is off, spray a little cleaning fluid and then wipe it with a soft and delicate cloth.
5. Filter cleaning of interactive projection equipment
The operation manager of the children's park should estimate the usage of the interactive projection based on the environment in the venue, and clean the filter of the interactive projection regularly (three months or half a year). For the method of removing the filter, please refer to the instructions for the specific interactive projection model.
The service life of an interactive projection device is generally 5-8 years, the service life of the LCD panel is 3-5 years; the service life of the bulb is about 2000-4000 hours; the service life of the optical lens is generally 2-5 years. Cleaning a projector that has been used for more than half a year can keep the fan of the machine running normally, maintain good ventilation, improve image clarity, and extend the service life of the projector bulb and LCD panel. Under normal operation, the life of a bulb can be extended by 200-300 hours: the life of the LCD panel can also be extended by more than one year; if a projector is maintained twice a year, it can not only extend the service life by more than 1-2 years, but also reduce the replacement and aging of projector accessories accordingly.
